Convert flysky from 6 ch to 10 ch.

NOTES

1. Tutorial to do this

https://www.youtube.com/watch?v=t1zBxB1FJaQ

2. Important to follow this. 

Firmware Version Number won't show + "Device is not connected"

 https://github.com/benb0jangles/FlySky-i6-Mod-/issues/102

STEP-BY-STEP

Step 1.

Download .exe from this link (https://github.com/benb0jangles/FlySky-i6-Mod-/tree/master/10ch%20Mod%20i6%20Updater/10ch_MOD_i6_Programmer_V1_5)

Step 2.

Connect wiring like this

Important to Remove the ATMEGA CHIP !!

Step 3.

Make sure to have every cables connected, then connect arduino uno to the laptop

Step 4.

Make sure Port is detected in Device Manager. Change the port to 1 - 8, in advanced mode.

Step 5.

Open Exe.

Step 6. 

Open Port.

Step 7.

Program.

Finish.